Learn to automate NetApp ONTAP using Ansible. This lab provides an overview of GIT and Ansible to understand how they work together to simplify the automation of NetApp storage solutions.

*** This is a read-only lab that gives you view permissions on a lab array. If you'd like to have full access to a FlashArray, check out one of our other Pure Storage labs (ActiveCluster, ActiveDR, FA Files, Remote Client/vVols) as those labs give you full access to make changes. *** The FlashArray //X Series is the Pure Storage primary all flash, NVMe offering. This lab is intended to give users experience with the Purity operating system via both HTML 5 Web Interface and the Purity CLI on real hardware in the WWT ATC.

In this lab you will walk through the simple configuration to setup and configure FA Files on a FlashArray along with setting up replication to a second FlashArray.

The Pure Storage FlashArray natively supports synchronous replication that allows one to stretch a provisioned volume across two storage arrays. This feature is called ActiveCluster, and this lab will show users how to setup, configure and utilize ActiveCluster in a VMware environment to demonstrate how it protects you from different failure scenarios.

Welcome to WWT's introduction to Ansible automation for the Dell PowerStore storage platform. In this lab, you will learn the basics of how to automate fundamental Dell PowerStore storage array administrative tasks utilizing Ansible. This lab is estimated to take under 1 hour to complete. The intended lab audience is a systems engineer with a basic understanding of PowerStore and Ansible components.

Pure Storage FlashArray //C lets you consolidate workloads and simplify storage with consistent all-flash performance at a lower TCO over hybrid storage. This lab consists of Pure's capacity-optimized array offering - FlashArray //C60 running Purity 6.x with File Services enabled.

If you are familiar with Ansible and want to learn how to use Ansible with the Pure Storage FlashArray, continue on with this lab that demonstrates how to simplify automation of a Pure Storage FlashArray. *** If you are a Storage admin, new to automation, and want to learn how to automate your Pure Storage environment using Ansible, check out this lab instead that teaches the basics of Ansible from a storage admin point of view.- "Ansible Automation Workshop - Pure Ansible Lab" (https://www.wwt.com/lab/ansible-automation-workshop-pure-ansible-lab)

HPE Greenlake Central is cloud-based management console for HPE Greenlake services.